Thorough Guide to Resolve TP Link Firmware Update Stuck Issue

By Oscarjack 4 Min Read

Many users have complained about facing the firmware update stuck issue with their TP Link wireless range extenders. Are you also struggling with the same problem? If you are nodding your head in yes, then fret not. Simply walk through the below-mentioned reasons and learn about why you are facing this issue. Also, get to know about various ways using which you can troubleshoot it.

Reasons Behind TP-Link Firmware Update Stuck Issue

Here are some of the most common reasons why you are experiencing the TP-Link extender firmware update stuck issue:

Reason 1 – The computer that you are using does not have enough space for the firmware file to get downloaded.

Reason 2 – After accessing tplinkrepeater.net and trying to perform TP-Link firmware update, you might have downloaded the wrong firmware version.

Reason 3 – You did not follow the correct steps to update the firmware of your TP-Link wireless range extender.

Reason 4 – Technical glitches can also lead you to the TP-Link firmware update stuck issue.

Fixed: TP-Link Firmware Update Stuck Issue

  • Delete the Extra Files

As mentioned above, your computer might not have enough space due to which you are stuck with the TP-Link extender firmware update failure issue. To troubleshoot it, it is advised that you delete all the extra files from your device to create some space for the update to get downloaded properly.

  • Update the Right Version

You might have chosen a different method to perform TP Link firmware update due to which you ended up downloading the wrong version. Therefore, access the TP Link extender setup page, navigate to the Settings option, and click the Firmware Update button. Trust us, in this way, the chances of updating the wrong firmware version will become next to impossible.

  • Reboot Your TP-Link Extender
See also  Yt5s: Top-Rated Tool for Converting YouTube to MP3

Another thing that you can do to get rid of the TP-Link extender firmware update stuck issue is to reboot your wireless device. Here is how you can do so:

  • Disconnect your TP-Link wireless range extender from your home router.
  • Power off your extender and unplug it from its wall socket.
  • Wait for a couple of seconds.
  • Once done, plug your extender back into its wall socket.
  • Reconnect your TP-Link wireless range extender to your home router.

Now, check whether you are still struggling with the same issue. Are you? If yes, then take the help of the next troubleshooting hack.

  • Reset Your TP-Link Extender

Walk through the step-by-step guidelines mentioned below and learn how to restore your TP-Link wireless range extender to the default factory settings:

  • Look for the reset button on your wireless range extender.
  • Once located, carefully press it and hold on for a couple of seconds.

Now, reconfigure your TP-Link repeater. If you are not sure about how to set up your wireless device, it is recommended that you refer to the user manual. As soon as you are done setting up your extender, perform TP Link firmware upgrade.

Summing Up

With that, we are wrapping up our guide on troubleshooting the TP Link extender firmware update stuck issue. We hope that the aforementioned hacks helped you resolve the issue that you were facing with your device.

In case you are aware of any other hack except the ones mentioned in this article through which the same issue can be resolved, consider sharing it with your fellow readers. They would surely like to learn about something new.

See also  The Sri Lankan iPhone 15 Pro Max Hunt: Market Analysis and Top Retailers
Share This Article
Follow:
Contact Us: zainliaquat10@gmail.com WhatsApp Number: +923024670115
Leave a comment