Fixed: Netgear Orbi WiFi Not Working After Firmware Update

By Oscarjack 6 Min Read

Every tech expert recommends that you should keep the Netgear Orbi router updated. It removes numerous bugs, errors, and technical glitches. What if after the firmware update, the Netgear Orbi WiFi is not working? Well, that happens frequently. If you are experiencing the same issue, don’t worry. We are here to assist with the best troubleshooting tips.

Let’s get you through some of the easiest yet most effective troubleshooting tips if Netgear Orbi WiFi is not working after a recent firmware update. Implementing these tips will resolve the issue you are facing in an instant. Keep the Orbi login details by your side before starting the process. Without further delay, let’s move forward.

Solution: Orbi Not Working After Firmware Update

Reasons could be numerous why your Netgear Orbi WiFi is not working after updating router firmware. Don’t worry. No matter what the reason is, the following troubleshooting tips will fix the issue without any hassle.

Reboot Your Orbi Router

Technical glitches, errors, or bugs are some of the most common reasons why you are facing the Netgear Orbi WiFi not working issue. Since you can’t do anything about the issues, you can simply do the reboot. So, start with rebooting the Netgear Orbi WiFi device.

Following the right rebooting sequence will provide you with better results. Start with removing the devices connected to your Orbi WiFi network. Unplug your router from the wall socket. Give it some rest before reconnecting the Netgear Orbi router to the power circuit. Once it turns on, reconnect your devices. Thus, the Orbi WiFi not working after the firmware update issue might be fixed.

See also  How to Choose Crop Irrigation System

Reestablish Internet Connections

Having a fast internet connection is crucial to connecting your devices to the internet. However, if your Netgear Orbi does not have access to the internet connection, you are bound to face the issue. Therefore, before you do any changes do a speed test or access the orbilogin web page.

If you get undesirable results, you should contact your Internet Service Provider (ISP). Make sure the Orbi router has a strong internet connection with the host modem. Try reestablishing the connection type that you are using to link the router to the modem.

If there are backend issues, wait for some time before checking whether Orbi WiFi is working or not.

Check Cable Connections

Most users follow the conventional approach when it comes to connecting the Netgear WiFi router with host modems. They connect them using a wire. That is where the issue might be residing. Firstly, check the cable that you are using to connect to the internet.

It might be corroded from within, have cuts, or be completely worn out. In that case, the WiFi connection will not receive any internet. Also, the Netgear Orbi device is connected to the power source with a power cable. That might also be faulty because of which the router keeps rebooting. If that happens, there won’t be an established WiFi network. If the issue doesn’t resolve, you should always replace the cables used to connect devices.

Know Firmware Version

Have you checked the firmware version that you just installed? Is it compatible with your Netgear Orbi router? You should have answers to all such questions. Perhaps, the installed firmware might be corrupt. Hence, installing the firmware won’t resolve any other issues. Rather, you are bound to face the Netgear Orbi WiFi connection not working issue.

See also  Understanding Chagaras: Navigating the Complexities of Data Dynamics

So, run a check on your Netgear Orbi router firmware, note down its technicalities, and understand whether it is compatible with your hardware and software. In case you need to change the firmware, follow the next step.

Do Firmware Update Again

Perform Netgear Orbi factory reset. It will erase the installed firmware. After that, you need to reinstall the up to date firmware. Make sure you download the latest firmware after ensuring it suits your Orbi router. Otherwise, you will get the same results as before.

Make sure you don’t run any other activities in the background while the firmware is being updated. It might hamper its processing.

Sum Up

All the troubleshooting tips given above will help you resolve Netgear Orbi WiFi not working after the firmware update issue. Moreover, you must download the latest firmware from the official source. Otherwise, you might download the corrupt firmware file.

With everything in check, you can easily resolve the issue. Let us know in the comment section which troubleshooting tip helped you.

Share This Article
Follow:
Contact Us: zainliaquat10@gmail.com WhatsApp Number: +923024670115